Overview
Built specifically for boats, these hatch lift supports-also called gas springs, gas struts, lift supports, gas shocks, gas props, or motion dampers-balance hatch weight, prevent slamming, and protect hinges and hardware. Land tunes damping and force to give smooth travel and steady hold, whether you are accessing lockers on deck or service spaces below.
Key Features
Marine ready: stainless steel SS316 options with corrosion resistant rods and hardware for saltwater use.
Smooth motion: nitrogen charging with oil damping for soft open and soft close on heavy lids.
Size coverage: extended lengths 12–28 inch with typical strokes 80–220 mm to fit most deck and cabin layouts.
Force range: factory set 300–900 N (approx 67–202 lbf) with adjustable force versions for precise balance.
Long service life: precision honed tubes, hardened rods, and low leakage NBR or PU seals; cycle life ≥ 40,000.
Quiet operation: low friction guidance minimizes chatter in cabins and cockpits.
Easy fit: ball sockets or eyelets for 10–13 mm studs; positive clip retention for quick service.
All weather: dependable from −30 °C to +80 °C; specialty oils for extreme climates on request.
Compliance: RoHS and REACH compatible oils and finishes.
Specifications
Extended lengths: 12 in, 14 in, 16 in, 18 in, 20 in, 22 in, 24 in, 26 in, 28 in
Typical strokes: 80–220 mm by length
Forces: 300 N, 400 N, 500 N, 600 N, 700 N, 800 N, 900 N
Cylinder and rod: Ø18ר8 mm or Ø22ר10 mm; heavy duty options available
Materials: powder coated steel (standard), SS304 or SS316 for marine environments
Finishes: matte black, polished stainless, or custom color
End fittings: 10 or 13 mm ball sockets, metal eyelets, angle brackets, quick release ends
Orientation: install rod end down in the closed position to keep seals lubricated
How to Choose
Measure length: with the hatch fully open, measure center to center between the two mounts; select an extended length close to that distance.
Select force per unit:
Small locker lid or light composite panel: 300–450 N
Medium cabin hatch or fish box lid: 500–700 N
Large deck hatch or glass top: 800–900 N
For wide hatches, use two supports to prevent racking and reduce hinge stress.
Environment: specify SS316 for salt exposure or frequent wash down; choose black nitrided rod when glare reduction is needed.
Fitment details: confirm stud size (10 or 13 mm) and preferred end fitting before ordering.
Installation Guide
Support the hatch securely.
Lift the retaining clip slightly, press the socket onto the stud, then reseat the clip.
Cycle open and close to check full travel and clearance at hinges and stays.
For adjustable force versions, bleed pressure gradually until the hatch rises smoothly and stays open without drift.
Boat Hatches Gas Spring - Marine Application Overview
Land's boat hatch gas springs deliver reliable performance for marine access systems, ensuring smooth operation and secure positioning in demanding saltwater environments. These marine-grade components are specifically engineered to withstand the unique challenges of vessel operations while maintaining consistent functionality.
Primary Applications
Deck Hatch Systems
Our gas springs provide effortless operation for deck hatches and access panels, featuring 400N-700N force range to accommodate various hatch sizes and weights. The 316 stainless steel construction and marine-grade seals withstand constant saltwater exposure and UV radiation.
Engine Room Access
Specifically designed for engine compartment hatches and mechanical space access, these gas struts offer heat-resistant performance up to 90°C. The corrosion-resistant materials protect against engine fumes and moisture while ensuring reliable operation.
Cabin & Storage Access
Compact gas springs for cabin doors and storage compartment hatches feature space-saving designs with marine-certified corrosion protection. The smooth damping action prevents sudden movements in rough sea conditions.
Fishing & Commercial Vessels
Heavy-duty gas springs for commercial fishing boats and work vessels feature reinforced construction to withstand intensive use and harsh weather conditions. The special coating system resists damage from fishing gear and cargo handling.
Technical Features
Marine-grade 316 stainless steel
Saltwater-resistant sealing systems
Force range: 300N-800N
Temperature range: -20°C to 90°C
Custom lengths and end fittings
Specialized Applications
Sailboat cockpit lockers
Motor yacht flybridge access
Commercial ship hatch covers
Research vessel sampling ports
Land's boat hatch gas springs are certified to marine industry standards, providing reliable performance for shipyards, boat builders, and marine repair facilities worldwide. Our engineering team offers custom solutions for unique vessel configurations and special operational requirements.
Hot Tags: deck and cabin hatch lift supports, China deck and cabin hatch lift supports manufacturers, suppliers, factory, sliding door block-lift struts, soft close dampers for overbed tabletops, adjustable force gas springs for HMI, Wardrobe Lift Rail Gas Springs, heavy duty machine arm gas springs, front cab lift gas springs


