Heavy-Duty Ottoman Bed Lift Mechanism
LAND offers this heavy-duty ottoman bed lift mechanism for lift-up storage beds and furniture platforms that need a coordinated steel linkage and gas spring-assisted opening. The layout uses a long upper supporting rail, a slotted lower mounting rail and pivoting support arms to move the bed platform clear of the storage compartment.
The illustrated configuration has a 1200 mm upper rail, 620 mm base, 170 mm rear support height and a gas spring marked 550 mm. These are diagram references for one configuration, not universal dimensions for every bed size. Final force and mounting points should be matched to the platform weight, center of gravity and opening geometry.
Key Features
- Steel linkage assembly: The reference sheet specifies iron hardware with a sprayed surface finish and a multi-link lifting structure.
- Gas spring-assisted opening: A gas spring is shown connected between the upper rail and linkage to assist bed platform movement.
- Slotted mounting base: The lower rail includes mounting slots to support fitting and alignment during furniture assembly.
- Selection across several lengths: The reference specifications lists common length options of 900, 1080, 1100, 1200 and 1500 mm, with matching gas spring force ranges.
- Finish and project options: Black, white and gold are listed catalog color options. Special dimensions may be discussed for an OEM order.
1200 mm Reference Dimensions
| Item | Catalog reference |
|---|---|
| Illustrated upper supporting rail | 1200 mm |
| Illustrated lower mounting rail | 620 mm |
| Illustrated rear support height | 170 mm |
| Illustrated gas spring dimension | 550 mm (dimension basis not specified) |
| Catalog family size range | 800-1500 mm |
| Catalog stated capacity | 200 kg (installation-dependent; see note) |
| Material / coating | Iron / sprayed finish |
| Packaging | 1 set per box, including screws (confirm exact contents) |
Engineering note: The 200 kg figure is a reference-document claim and is not an independently verified load rating for every installation. The 550 mm dimension is shown beside the gas spring, but the reference sheet does not identify its stroke or precise measurement convention. Obtain an approved drawing before production or load-critical use.
General Size and Force Selection
These figures are catalog-listed selection ranges. They do not specify a measured F1 value for one particular gas spring, and they do not automatically apply to the 1200 mm illustrated assembly.
| Catalog length | Suggested force range | Member A (mm) | B (mm) | C (mm) | D (mm) |
|---|---|---|---|---|---|
| 900 mm | 400-1000 N | 30x30x(4.0x3.5) | 30x5.0 | 30x5.0 | 25x4.0 |
| 1080 mm | 450-1200 N | 30x30x(4.0x3.5) | 30x5.0 | 30x5.0 | 25x4.0 |
| 1100 mm | 450-1200 N | 30x30x(4.0x3.5) | 30x5.0 | 30x5.0 | 25x4.0 |
| 1200 mm | 500-1200 N | 30x30x(4.0x3.5) | 30x5.0 | 30x5.0 | 25x4.0 |
| 1500 mm | 500-1200 N | 30x30x(4.0x3.5) | 30x5.0 | 30x5.0 | 25x4.0 |
Steel section notation follows the reference specifications. A, B, C and D are catalog member labels, not the overall assembled dimensions. Available colors are listed as black, white and gold; final product configuration is subject to confirmation.
OEM and Purchasing Advantages
- Coordinated lifting geometry: A linkage mechanism allows the platform to pivot upward rather than relying on a simple single-point hinge.
- Hardware selection flexibility: Frame length and proposed gas spring force can be matched to different bed platform sizes.
- Practical sourcing format: The reference specifications lists one set per box with screws; exact gas spring and hardware quantities should be confirmed in the quotation.
Typical Applications
- Ottoman storage beds and lift-up bed frames
- Under-bed storage platform hardware in upholstered beds
- Furniture makers specifying coordinated lift brackets and gas springs
- OEM projects requiring size and gas spring force selection
What to Share for Configuration Matching
- Bed and lifting platform width, length and weight, including mattress where applicable.
- Hinge location, closed mounting clearance, opening angle and available installation space.
- Number of mechanisms and gas springs planned for the full bed.
- Preferred color, mounting hole pattern, hardware set contents and order quantity.
Frequently Asked Questions
Q: Does the 200 kg figure mean each gas spring can lift 200 kg?
A: No. The reference specifications state a 200 kg capacity for its heavy bed support series. It is not the force of one gas spring or a verified safe working load in every installation. Actual support requirements depend on platform weight, hinge geometry, number of mechanisms and the selected struts.
Q: Is the 550 mm dimension the stroke of the gas spring?
A: No. The reference sheet diagram labels the strut at 550 mm but does not define whether this is fully extended center-to-center length or another dimensional reference. Stroke and end-fitting dimensions must be confirmed from the selected strut drawing.
Q: Which gas spring force should I choose?
A: The reference sheet lists matching ranges from 400 to 1200 N depending on mechanism length. The exact force requires the bed platform weight, center of gravity, opening angle, mounting positions and number of struts.
Q: Are black, white and gold finishes available?
A: The reference specifications lists these finishes. Confirm the exact color, coating system and availability against the proposed order.
Q: What is supplied in one set?
A: The reference sheet describes one set per box including screws. The count and type of lift brackets, gas springs and fasteners should be stated on the final quotation or approved packing list.
Request an OEM Quote
Send LAND your bed platform dimensions, weight, mounting layout and quantity for an OEM bed lift mechanism quotation and gas spring matching review.
Hot Tags: heavy-duty ottoman bed lift mechanism, China heavy-duty ottoman bed lift mechanism manufacturers, suppliers, factory, adjustable arm gas shocks, gas lift supports for doctor chairs, gas rams for weight bench backrest, marine pneumatic struts, Medical Carts and Instrument Arms Gas Springs, sliding door stay supports

