304 vs. 316 Stainless Steel Gas Springs: How to Choose the Right Grade?
When selecting a stainless steel gas spring for an OEM application, choosing the correct material is just as important as selecting the right force, stroke, and mounting configuration.
Two of the most commonly specified stainless steel grades are 304 and 316. Although they look similar, they offer different levels of corrosion resistance and are suited to different operating environments.
For example, a gas spring installed inside an industrial cabinet may perform well with 304 stainless steel, while a gas spring fitted to a yacht hatch or marine access panel may require 316 stainless steel.
But is 316 always the better choice? What about 316L? And does specifying a stainless steel gas spring mean the entire assembly is protected against corrosion?
This guide explains the differences between 304, 316, and 316L stainless steel, compares their practical applications, and provides a selection checklist for OEM engineers and equipment manufacturers.
1. What Is the Difference Between 304 and 316 Stainless Steel?
Both 304 and 316 belong to the austenitic stainless steel family.
They contain chromium and nickel, which contribute to their corrosion resistance, strength, and fabrication characteristics.
The most important difference is the addition of molybdenum in 316 stainless steel.
304 Stainless Steel
304 is one of the most widely used stainless steel grades.
Its main characteristics include:
- Good general corrosion resistance.
- Good formability and weldability.
- Suitable for many indoor and general industrial applications.
- Good performance in relatively mild environments.
- Generally more economical than 316.
304 is commonly used in equipment housings, kitchen equipment, general industrial components, and applications where exposure to chlorides is limited.
However, its resistance to chloride-induced pitting and crevice corrosion is lower than that of 316.
For this reason, 304 is generally not recommended for direct seawater service.
316 Stainless Steel
316 contains molybdenum, typically around 2%, which improves its resistance to chloride-related corrosion.
Its main characteristics include:
- Better resistance to chloride exposure than 304.
- Improved resistance to pitting and crevice corrosion.
- Good performance in many coastal and marine applications.
- Good fabrication and welding characteristics.
- Suitable for more demanding industrial environments.
316 is widely selected for marine fittings, boat hardware, coastal equipment, and applications exposed to salt spray.
However, it is important to understand that 316 is not completely corrosion-proof. Severe seawater exposure, stagnant saltwater, and narrow crevices can still cause corrosion.
2. 304 vs. 316 vs. 316L: A Practical Comparison
Understanding the differences between these three grades helps OEM engineers make more appropriate material decisions.
| Property | 304 | 316 | 316L |
|---|---|---|---|
| Stainless steel family | Austenitic | Austenitic | Austenitic |
| Molybdenum addition | No intentional addition | Yes | Yes |
| General corrosion resistance | Good | Very good | Very good |
| Chloride resistance | Lower | Higher | Higher |
| Marine applications | Limited | Widely used | Widely used |
| Weldability | Good | Good | Good |
| Carbon content | Standard | Standard | Lower |
| Typical application | General industrial | Marine and coastal | Corrosive welded structures |
What Does the L in 316L Mean?
The letter L stands for low carbon.
316L has a lower carbon content than standard 316 stainless steel.
This is particularly useful for certain welded structures because lower carbon content reduces the risk of sensitization during welding and helps maintain corrosion resistance around welded areas.
For welded stainless steel assemblies exposed to corrosive environments, 316L may therefore be a suitable choice.
However, 316L should not automatically be considered stronger or universally more corrosion-resistant than 316. The appropriate selection depends on the component design, fabrication process, and operating environment.
3. Why Is 316 Stainless Steel Preferred for Many Marine Applications?
Marine environments present several corrosion challenges.
Unlike ordinary indoor environments, marine equipment may be exposed to:
- Saltwater.
- Salt spray.
- Coastal humidity.
- Chloride deposits.
- Temperature variations.
- Repeated wetting and drying.
- Salt accumulation in narrow gaps and joints.
These conditions can damage stainless steel through localized corrosion mechanisms, particularly pitting and crevice corrosion.
How Does Molybdenum Help?
Stainless steel resists corrosion through a thin protective passive film on its surface.
Both 304 and 316 rely on this protective film.
However, the molybdenum added to 316 improves its resistance to chloride-induced localized corrosion.
This is why 316 is commonly selected for marine deck fittings and other components exposed to coastal conditions.
For example:
- Yacht hatch gas springs.
- Marine storage compartment supports.
- Boat access panel gas springs.
- Marine equipment covers.
- Outdoor marine machinery enclosures.
For these applications, 316 may offer a better balance between corrosion resistance, durability, and material cost.
However, direct seawater immersion and severe splash-zone exposure require additional engineering assessment. Standard 316 should not be assumed suitable for every seawater application.
4. Can 316 Stainless Steel Gas Springs Rust in Seawater?
Yes.
This is one of the most important points that equipment manufacturers should understand.
Although 316 is often called marine-grade stainless steel, it is not immune to corrosion under all marine conditions.
The British Stainless Steel Association explains that 316 stainless steel can experience pitting and crevice corrosion when exposed to seawater.
Several factors influence its performance.
Chloride Concentration
Saltwater contains chloride ions that can attack the passive film.
As seawater evaporates, salt concentrations may increase on exposed surfaces.
Crevice Formation
Small gaps around mounting brackets, fasteners, joints, and fittings can trap moisture and salt deposits.
These areas may become particularly vulnerable to crevice corrosion.
Water Retention
Components that remain wet for extended periods may experience more severe corrosion conditions.
Good drainage and avoiding unnecessary water accumulation are important design considerations.
Temperature
Higher temperatures can increase the risk of localized corrosion in chloride-containing environments.
For this reason, material selection should consider the actual operating temperature as well as salt exposure.
Surface Contamination
Iron particles, fabrication residues, and improperly finished weld areas can compromise stainless steel surface performance.
Proper fabrication, cleaning, and surface treatment are therefore important.
For applications involving continuous seawater immersion or exceptionally aggressive chloride environments, higher-alloy materials such as duplex stainless steels may need to be evaluated.
5. Which Stainless Steel Grade Should You Choose for Different Applications?
The correct material depends on the actual operating environment rather than simply the industry in which the equipment is used.
The following table provides a practical starting point.
| Application | Suggested Material | Selection Considerations |
|---|---|---|
| Indoor industrial cabinets | 304 | Usually suitable for mild environments |
| General machinery covers | 304 / 316 | Depends on chemical and moisture exposure |
| Outdoor equipment | 304 / 316 | Consider pollution and salt exposure |
| RV storage compartments | 304 / 316 | Depends on coastal use and washdown |
| Boat cabin access panels | 316 | Consider salt spray and maintenance |
| Yacht deck hatches | 316 | Better suited to typical above-waterline marine exposure |
| Marine equipment exposed to heavy salt spray | 316 or higher alloy | Requires application-specific evaluation |
| Continuous seawater immersion | Duplex or higher-alloy materials | Requires specialist material selection |
These are preliminary recommendations rather than universal material specifications.
For example, an RV primarily used inland may have very different corrosion requirements from an RV frequently operated near the ocean.
Similarly, a yacht hatch above the waterline has different exposure conditions from a component permanently submerged in seawater.
6. Why the Entire Gas Spring Assembly Matters
When purchasing a stainless steel gas spring, specifying the cylinder material alone is not always sufficient.
A complete gas spring assembly may include several different components:
- Pressure tube.
- Piston rod.
- End fittings.
- Ball sockets.
- Mounting brackets.
- Fasteners and retaining components.
- Internal sealing and guiding components.
Each component has its own functional and environmental requirements.
For demanding marine applications, OEM buyers should confirm which exposed components are manufactured from 304, 316, or 316L stainless steel.
It is also important to review the compatibility of mounting hardware and connecting materials.
For example, combining stainless steel components with aluminum or other metals may introduce galvanic corrosion considerations depending on the environment and electrical contact conditions.
A product described simply as a stainless steel gas spring does not necessarily mean that every individual component has the same stainless steel grade.
Clear material specifications help prevent misunderstandings during purchasing and production.
7. Does Surface Treatment Affect Stainless Steel Corrosion Resistance?
Yes.
Material grade is important, but surface condition and fabrication quality also play significant roles.
Even a 316 stainless steel component can experience premature corrosion if its surface is contaminated or poorly finished.
Several manufacturing considerations deserve attention.
Surface Polishing
A smoother surface generally retains less dirt and fewer salt deposits.
Appropriate polishing can help improve corrosion performance in demanding environments.
Pickling and Passivation
These treatments help remove fabrication-related contamination and support the restoration of the stainless steel's protective passive surface.
The correct process should be selected according to the material and fabrication requirements.
Electropolishing
Electropolishing can improve surface smoothness and is used in applications where clean, refined stainless steel surfaces are important.
However, electropolishing does not make an unsuitable stainless steel grade appropriate for every corrosive environment.
Welding Quality
Weld discoloration, heat tint, and contamination can affect local corrosion resistance.
Proper welding procedures and post-weld cleaning are important for stainless steel assemblies.
Regular Cleaning
Salt deposits should not be allowed to accumulate unnecessarily.
For marine equipment, rinsing exposed stainless steel components with fresh water after use can help remove salt and other surface deposits.
The International Molybdenum Association and Australian Stainless Steel Development Association both emphasize that surface finish and maintenance are important considerations alongside material grade.
8. How to Specify the Correct Stainless Steel Gas Spring for an OEM Project
Before requesting a quotation or starting sample development, OEM engineers should provide sufficient information about the application.
The following checklist can help simplify the material selection process.
Step 1: Identify the Operating Environment
Determine whether the gas spring will be used indoors, outdoors, near the coast, in salt spray, or in direct contact with seawater.
Step 2: Define the Required Material Grade
Specify whether the exposed components require 304, 316, or 316L.
For demanding applications, identify the required grade of each relevant component rather than relying on a general stainless steel description.
Step 3: Confirm Mechanical Specifications
Material selection does not replace mechanical design requirements.
Confirm:
- Required extension force.
- Stroke length.
- Extended length.
- Compressed length.
- Rod and tube dimensions.
- End fitting specifications.
- Mounting arrangement.
Step 4: Discuss Surface Finishing
Identify whether polishing, passivation, electropolishing, or other finishing processes are required.
Step 5: Confirm Testing Requirements
Discuss the applicable corrosion testing methods, inspection criteria, and required documentation.
For example, ASTM B117 salt spray testing may be included in a customer's qualification requirements.
However, salt spray test hours should not automatically be interpreted as an equivalent number of years of actual service life.
Step 6: Evaluate the Complete Assembly
Check the exposed materials, end fittings, fasteners, mounting brackets, and potential areas where water and salt may accumulate.
A suitable material specification should consider the entire installed system.
9. How LAND Gas Springs Supports Stainless Steel OEM Projects
LAND Gas Springs manufactures stainless steel gas springs in 304, 316, and other customized configurations according to customer requirements.
Our products are designed for applications where corrosion resistance, mechanical performance, and reliable operation are important.
Typical applications include:
- Marine and yacht equipment.
- Boat access panels and hatches.
- RV compartments and storage doors.
- Outdoor industrial equipment.
- Food processing equipment.
- Specialized machinery and enclosures.
For customized OEM projects, our team can assist with:
- Stainless steel grade selection.
- Customized force and stroke specifications.
- Extended and compressed length confirmation.
- Stainless steel end fitting selection.
- Material and surface finish requirements.
- Sample development and evaluation.
- Agreed salt spray and functional testing.
- Quality inspection and technical documentation.
Selecting the correct stainless steel grade at the beginning of a project can help customers balance corrosion resistance, manufacturing requirements, and long-term operating costs.
Explore our Stainless Steel Gas Spring Range and OEM/ODM Manufacturing Capabilities.
Frequently Asked Questions
Is 316 stainless steel better than 304 for gas springs?
316 generally offers better resistance to chloride-induced pitting and crevice corrosion because it contains molybdenum. It is often preferred for coastal and marine applications, while 304 is suitable for many general-purpose applications with limited chloride exposure.
Can 304 stainless steel gas springs be used on boats?
It depends on the location and exposure conditions. For indoor or protected areas with limited salt exposure, 304 may be suitable. For exposed marine fittings and components subject to salt spray, 316 is generally a better starting point.
Is 316 stainless steel completely rust-proof?
No. 316 can still experience pitting and crevice corrosion, particularly in aggressive seawater conditions, stagnant water, and areas where salt accumulates.
What is the difference between 316 and 316L?
316L has a lower carbon content than standard 316. It is often preferred for welded components where reducing the risk of sensitization is important.
Is 316L more corrosion-resistant than 316?
Not necessarily in every environment. Their corrosion resistance is generally similar in many applications. The lower carbon content of 316L provides a particular advantage for certain welded constructions.
Can 316 stainless steel withstand continuous seawater immersion?
Standard 316 should not automatically be considered suitable for continuous seawater immersion. Severe chloride exposure and crevice conditions may require duplex or higher-alloy stainless steels.
Does electropolishing make 304 stainless steel equivalent to 316?
No. Surface finishing can improve surface condition and corrosion performance, but it does not change the fundamental alloy composition or make 304 equivalent to 316 in chloride resistance.
Conclusion: Choose Stainless Steel Based on the Actual Operating Environment
Selecting between 304, 316, and 316L stainless steel is not simply a matter of choosing the highest grade available.
The right decision depends on the operating environment, chloride exposure, fabrication requirements, surface condition, and expected service conditions.
For general industrial applications, 304 may provide a practical and economical solution.
For many coastal and marine applications, 316 offers improved resistance to chloride-related corrosion.
For certain welded structures, 316L may provide additional fabrication-related advantages.
Most importantly, OEM manufacturers should evaluate the complete gas spring assembly rather than focusing on a single component.
Need a Customized Stainless Steel Gas Spring?
LAND Gas Springs provides customized 304, 316, and other stainless steel gas spring solutions for marine, automotive, RV, and industrial applications.
Share your drawings, required force, stroke, mounting dimensions, and operating environment with our engineering team.
We can help review your requirements and discuss a suitable OEM solution.
Website: https://www.land-gassprings.com/
Email: info@land-gassprings.com
Technical References
1. International Molybdenum Association (IMOA)
Frequently Asked Questions: Differences Between 304 and 316 Stainless Steel
2. Australian Stainless Steel Development Association (ASSDA)
Grade Selection: Stainless Steel Materials and Corrosion Resistance
https://assda.asn.au/stainless-steel/grade-selection/
3. Australian Stainless Steel Development Association (ASSDA)
Corrosion Resistance in Marine Environments
https://www.assda.asn.au/component/content/article?id=170...in-marine
4. British Stainless Steel Association (BSSA)
Selection of 316, 304 and 303 Types of Stainless Steels for Seawater Applications

