Have you ever noticed that a gas spring feels stronger in hot weather but becomes weaker during cold winter conditions?
This is not necessarily a product defect. It is a normal physical characteristic of gas springs that engineers need to consider during product design and component selection.
Gas springs use pressurized nitrogen to generate extension force. Because gas pressure changes with temperature, the output force also changes as the surrounding temperature rises or falls.
For manufacturers of RVs, marine equipment, commercial vehicles, and industrial machinery, this characteristic can directly influence how a lid, hatch, access panel, or equipment cover operates.
Understanding temperature effects is particularly important when equipment must perform reliably across different seasons and environmental conditions.
In this guide, we explain how temperature influences gas spring force, internal damping, sealing performance, and product selection.
1. Why Does Temperature Change Gas Spring Force?
A conventional gas spring contains compressed nitrogen inside a sealed cylinder. The nitrogen pressure acts on the effective piston area, generating the extension force that supports the connected structure.
The basic relationship is:
F = P × A
Where:
- F = Gas spring force.
- P = Internal gas pressure.
- A = Effective piston rod cross-sectional area.
When temperature increases, nitrogen pressure increases, resulting in higher extension force. When temperature decreases, internal pressure drops, reducing extension force. Force comparisons must always be made at the same piston rod position under comparable measurement conditions.
2. How Much Does Gas Spring Force Change with Temperature?
As a general engineering reference, several manufacturers publish approximate values around 3–3.5% for every 10°C change in temperature (e.g., SUSPA specifies ~3.5%/10°C, Bansbach gives ~3.3%/10°C relative to a 20°C reference).
Practical Calculation Example
Suppose an OEM application uses a gas spring with a nominal extension force of 500 N at 20°C. Using an illustrative 3.5% change per 10°C:
| Temperature | Approximate Force |
|---|---|
| 0°C | 465 N |
| 10°C | 482.5 N |
| 20°C | 500 N |
| 30°C | 517.5 N |
| 40°C | 535 N |
Illustrative calculations based on a simplified linear estimate using a 20°C reference. Actual force must be confirmed through product-specific testing.
3. What Happens to Gas Springs in Cold Environments?
- Reduced Extension Force: Lower nitrogen pressure reduces lifting assistance for RV compartments, truck toolboxes, and outdoor enclosures.
- Increased Damping Resistance: Oil viscosity increases at lower temperatures, slowing down extension/compression speeds.
- Seal Material Performance: Elastomeric seals become less flexible in sub-zero environments, affecting friction and sealing integrity.
4. What Happens to Gas Springs in High-Temperature Environments?
- Increased Internal Pressure: Higher gas pressure increases opening assistance and closing effort on lightweight lids.
- Reduced Oil Viscosity: Thinner oil reduces hydraulic damping resistance, potentially causing faster motion.
- Accelerated Seal Wear: Operating beyond rated limits softens elastomers and increases long-term wear.
5. Understanding Gas Spring Operating Temperature Ranges
| Manufacturer Reference | Published Temperature Information |
|---|---|
| SUSPA | -30°C to +80°C standard operating range |
| Bansbach | -30°C to +80°C standard range |
| Bansbach Special Configurations | Special seal options down to -55°C or up to +200°C |
6. Which Industries Need Special Temperature Considerations?
- RV and Trailer Applications: Subject to winter sub-zero storage and intense summer solar heat.
- Marine and Offshore Equipment: High humidity, salt air, and direct solar exposure.
- Truck and Commercial Vehicles: Engine-adjacent compartments with high localized radiant heat.
- Industrial Machinery: Heat-generating production lines, furnaces, and variable plant ambient temperatures.
7. How Should OEM Engineers Select Gas Springs for Extreme Temperatures?
- Step 1: Determine the Actual Temperature Range - Identify minimum/maximum component temperatures, direct sun exposure, and nearby heat sources.
- Step 2: Define Required Force at Reference Temperature - Specify nominal force at 20°C reference conditions.
- Step 3: Evaluate Force Changes Across the Range - Verify that mechanism operates safely at both temperature extremes.
- Step 4: Select Suitable Sealing Materials - Confirm seal compound compatibility for low-temp flexibility or high-temp durability.
- Step 5: Review Damping Requirements - Account for hydraulic oil viscosity shifts across the operating span.
- Step 6: Validate the Complete Application - Conduct environmental chamber testing on the full assembly.
8. Common Mistakes When Selecting Gas Springs for Temperature-Sensitive Applications
- Selecting only by room-temperature force.
- Assuming all gas spring brands share identical temperature limits.
- Ignoring localized radiant heat from engines or machinery.
- Focusing on pressure change while ignoring damping oil viscosity shifts.
- Over-sizing nominal force for winter without verifying summer closing resistance.
9. How LAND Gas Springs Supports Temperature-Sensitive OEM Projects
LAND Gas Springs manufactures compression gas springs, locking gas springs, stainless steel gas springs, hydraulic dampers, and related mounting components for OEM applications.
Explore our Gas Spring Product Range and Stainless Steel Gas Springs.
Frequently Asked Questions
Does a gas spring become stronger in hot weather?
Generally, yes. Higher temperatures increase nitrogen gas pressure, raising output force.
How much does gas spring force change for every 10°C?
Approximately 3% to 3.5% per 10°C, depending on manufacturer specifications and internal construction.
Can standard gas springs operate below freezing?
Standard gas springs typically operate down to -30°C. Extreme conditions require specialized low-temperature seals.
Can special gas springs be manufactured for high-temperature applications?
Yes. Specialized seal configurations can withstand temperatures up to +200°C.
Does temperature affect hydraulic dampers?
Yes. Temperature shifts hydraulic fluid viscosity, changing movement resistance and speed.
Should gas spring force be measured at 20°C?
Yes, 20°C is the standard international engineering reference temperature for nominal force ratings.
Conclusion
Temperature significantly impacts gas spring extension force, damping speed, and seal longevity. OEM engineers should evaluate full operating temperature ranges, seal compounds, and mechanical leverage early in the design cycle.
Need Help Selecting Gas Springs for Extreme Temperatures?
Share your drawings, force requirements, and operating temperature range with LAND Gas Springs.
Website: https://www.land-gassprings.com/
Email: info@land-gassprings.com
Technical References
1. SUSPA - Gas Springs FAQ: Temperature Effects and Operating Conditions
https://www.suspa.com/us/products/gas-springs/faq
2. Bansbach easylift - Gas Springs: Technical Specifications and FAQs
https://www.bansbach.com/zh-hans/products/gas-springs/
3. Febrotec - Gas Struts: Force Characteristics and Technical Information
https://www.febrotec.com/en-GB/gas-struts-1

