Hey there! If you're dealing with a damaged ottoman bed gas strut, you're in the right place. I'm a supplier of ottoman bed gas struts, and I've seen my fair share of these issues. In this blog, I'll walk you through the steps to safely remove those pesky damaged gas struts.
First off, let's talk about why you might need to remove a damaged gas strut. Gas struts are crucial for the smooth operation of an ottoman bed. They help you lift and lower the bed easily, providing support and stability. But over time, they can wear out, get damaged, or lose their pressure. When that happens, you'll notice that the bed might not open or close as smoothly as it used to, or it could even be difficult to lift at all. That's when it's time to take action and replace those gas struts.
Before you start the removal process, safety should be your top priority. Gas struts are under high pressure, so if they're not handled correctly, they can cause serious injury. Here are some safety tips to keep in mind:
- Wear protective gear: Put on a pair of safety goggles and gloves to protect your eyes and hands from any potential debris or sharp edges.
- Release the pressure: Before you start removing the gas strut, make sure to release the pressure. You can do this by gently pushing the bed down to its closed position. This will help reduce the risk of the gas strut suddenly releasing its pressure and causing an accident.
- Use the right tools: You'll need a few basic tools for this job, including a socket wrench, pliers, and a flathead screwdriver. Make sure you have these tools on hand before you start.
Now that you're all set with safety, let's get into the actual removal process. Here are the steps you need to follow:


Step 1: Locate the Gas Struts
The first thing you need to do is find where the gas struts are located on your ottoman bed. In most cases, they're attached to the frame of the bed and the underside of the mattress platform. You might need to lift the mattress to get a better look.
Step 2: Remove the End Caps
Once you've located the gas struts, you'll see that they have end caps on both ends. These end caps are usually held in place by a small clip or pin. Use your pliers to carefully remove the clip or pin, and then gently pull off the end cap.
Step 3: Disconnect the Gas Strut
With the end caps removed, you can now disconnect the gas strut from the bed frame and the mattress platform. This is where your socket wrench comes in handy. Use it to loosen the bolts or nuts that are holding the gas strut in place. Once the bolts or nuts are loose, you should be able to pull the gas strut free.
Step 4: Repeat the Process
If your ottoman bed has more than one gas strut, you'll need to repeat the above steps for each one. Make sure to keep track of which gas strut came from which side of the bed, as they might be different lengths or have different specifications.
Step 5: Inspect the Gas Struts
Once you've removed all the damaged gas struts, take a close look at them. Check for any signs of damage, such as leaks, dents, or cracks. If you notice any damage, it's important to replace the gas struts as soon as possible.
Step 6: Replace the Gas Struts
Now that you've removed the damaged gas struts, it's time to install the new ones. Make sure you choose the right gas struts for your ottoman bed. You can find the specifications for your bed in the owner's manual or by contacting the manufacturer. Once you have the new gas struts, simply reverse the removal process to install them.
Step 7: Test the Bed
After you've installed the new gas struts, it's important to test the bed to make sure it's working properly. Lift the bed up and down a few times to see if it opens and closes smoothly. If you notice any issues, double-check the installation to make sure everything is secure.
And that's it! You've successfully removed and replaced the damaged gas struts on your ottoman bed. Now you can enjoy a smooth and easy-to-use ottoman bed once again.
But wait, there's more! As a supplier of ottoman bed gas struts, I also offer a wide range of other gas struts for different industries. For example, if you're in the tooling fixtures and jigs positioning industry, you might be interested in our Tooling Fixtures and Jigs Positioning Gas Springs. These gas springs are designed to provide precise positioning and support for your tools and equipment.
If you're in the caravan trailer door ramp industry, we also have Caravan Trailer Door Ramp Gas Struts. These gas struts are specifically designed to help you open and close your caravan trailer door ramp with ease.
And if you need gas struts for your chest lid, we offer Chest Lid Stay Gas Struts. These gas struts are perfect for keeping your chest lid open and providing support when you need it.
So, if you're in the market for high-quality gas struts, whether it's for your ottoman bed or any other application, don't hesitate to get in touch. We're here to help you find the right gas struts for your needs and provide you with excellent customer service.
Contact us today to start the procurement process and let's work together to get you the gas struts you need!
References
- DIY ottoman bed gas strut replacement guides from home improvement websites
- Manufacturer's manuals for ottoman beds and gas struts

